Please read this leaflet before you begin the test • EARLY DETECTION: Can be used as early as 7-10 days after conception. (7 days before next period due in a 28 day cycle). • SIMPLE TO USE: It is best if you test your urine first thing in the morning. This is when the levels of the pregnancy hormone show higher. 1. Remove test from foil wrapper and take off replaceable cap. 2. Hold the tester in your urine stream for a full 15 seconds. Do not allow urine to get on the test or control windows. You can collect your urine in a clean, dry container if you prefer, then place the tester tip in urine for the full 15 seconds. 3. Once you have done this, remove from the urine, replace the cap and lay it down on a flat surface. 4. Wait 3 minutes for the red lines to appear. If no red line appears wait another minute. (Test must be read within 10 minutes). 5. Read the result: • A red line must appear in the control (C) window. This shows the test has worked. • If there are two red lines - one (C) and one (T) then you are PREGNANT. • If only one red line shows at the (C) then you are NOT pregnant. The red line at (T) may be very faint but this is still shows a pregnancy result.
